Influence of pain duration and severity on oral health-related quality of life and patient satisfaction during adult treatment with clear aligners.

BACKGROUND: This study aims to compare the impact of pain on quality of life and patient satisfaction during treatment with aligners. METHODS: Ninety-four subjects in active treatment were invited to answer self-reported questions concerning pain severity and duration, occurrence of other signs and symptoms, and level of satisfaction with their treatment. Also, the OHIP-14 questionnaire was applied to assess patients' OHRQoL. RESULTS: Ninety-four patients (49 women and 45 men) answered the survey. Pain duration of 1-3 days was reported by 69.1% of patients (n = 60). For those who reported pain (n = 84), it was considered mild severity by 42.9% and moderate by 52.4%. Almost sixty-four percent of the sample were very satisfied with the aligner's aesthetics (n = 60) and forty-nine percent were satisfied with treatment in general (n = 46). Mean OHIP-14 score was 3.36 ± 2.54. OHRQoL was significantly associated with pain severity, whereas patients who reported having experienced moderate pain presented a significantly higher mean OHIP-14 score than those who reported having experienced mild pain (3.92 ± 1.93 and 2.69 ± 2.83, respectively; p = 0.036). The "psychological discomfort" OHIP-14's domain was the most influenced by the level of pain. CONCLUSION: Pain severity significantly influenced OHRQoL, in adult patients under treatment with clear aligners. However, high levels of patient satisfaction were reported, regardless of pain duration or severity.

Comparison of sinusitis rate after sinus lift procedure and zygomatic implant surgery: a meta-analysis.

PURPOSE: To evaluate and compare the reported sinusitis occurrence after the sinus lift procedure and zygomatic implant placement. METHODS: This meta-analysis has been registered at PROSPERO. Studies were searched on six databases. Two authors screened titles and abstracts and fully analyzed the studies against the inclusion and exclusion criteria. The RoB 2.0 and the ROBINS-I tools were used to assess the quality and risk of bias of the included studies. The random-effects model was used for the meta-analysis. The prevalence of sinusitis was calculated based on the total of patients. Subgroup analysis was performed by sinus lift or zygomatic implant surgery technique. RESULTS: The search identified 2419 references. After applying the inclusion criteria, 18 sinus lift and 9 zygomatic implant placement studies were considered eligible. The pooled prevalence of sinusitis after sinus lift procedure was 1.11% (95% CI 0.30-2.28). The prevalence after zygomatic implant placement was 3.76% (95% CI 0.12-10.29). In the subgroup analysis, the lateral window approach showed a prevalence of sinusitis of 1.35% (95% CI 0.34-2.8), the transcrestal technique of 0.00% (95% CI 0.00-3.18), and the SALSA technique of 1.20% (95% CI 0.00-5.10). Regarding the techniques for zygomatic implant placement, the sinus slot technique showed a prevalence of 21.62% (95% CI 9.62-36.52) and the intrasinus technique of 4.36% (95% CI 0.33-11.08), and the prevalence after the extrasinus technique was 0.00% (95% CI 0.00-1.22). CONCLUSION: The sinusitis occurrence rate was higher after zygomatic implant placement than after sinus lift procedure and this occurrence was different depending on the used technique.

Three-dimensional finite element analysis of three internal tapered implant-abutment designs / Análise tridimensional de elementos finitos de três geometrias implante-abutment cônicos internos

ABSTRACT Objective: The aim of this study was to compare the stress distribution in internal tapered connection implants with different adaptation geometries submitted to oblique load simulation using the Finite Element Analysis (FEA) method. Methods: Three different internal tapered implant-abutment assemblies were modeled by varying only the diameter of the abutment body in the cone region. The dimensions of the implants were 4.0 mm in diameter and 13 mm in length. Oblique loads of 210 N angled 30 degrees to the long axis of the implant were applied to a hemispherical body positioned over the abutments simulating a dental crown. The stress generated by the implant-abutment assembly was analyzed by the FEA method using the von Mises criterion. Results: A higher concentration of stress in the coronal region (collar) and implant body on the opposite side of the load application was shown, as well as in the body region of the abutments and in the screw threads. The cervical region of the implants showed the highest von Mises stress values, the highest values being observed in G3 (1034 MPa), followed by G2 (841 MPa) and G1 (702 MPa). Conclusion: According to the results presented, it can be concluded that the stress distribution was more homogeneous and less concentrated in the G1 implant-abutment assembly. Therefore, the use of abutments with dimensions standardized by the implant manufacturer is recommended.

RESUMO Objetivo: O objetivo deste estudo foi comparar a distribuição de tensões em implantes de conexão cônica interna com diferentes geometrias de adaptação submetidos à simulação de carga oblíqua pelo método de Análise de Elementos Finitos (FEA). Métodos: Três diferentes conjuntos implante-pilar cônicos internos foram modelados variando apenas o diâmetro do corpo do pilar na região do cone. As dimensões dos implantes foram de 4,0 mm de diâmetro e 13 mm de comprimento. Cargas oblíquas de 210 N anguladas 30 graus em relação ao longo eixo do implante foram aplicadas sobre um corpo hemisférico posicionado sobre os pilares simulando uma coroa dentária. A tensão gerada pelo conjunto implante-pilar foi analisada pelo método FEA utilizando o critério de von Mises. Resultados: Foi evidenciada maior concentração de tensões na região coronal (colar) e corpo do implante no lado oposto da aplicação da carga, assim como na região do corpo dos pilares e nas roscas dos parafusos. A região cervical dos implantes apresentou os maiores valores de tensão de von Mises, sendo os maiores valores observados em G3 (1034 MPa), seguido de G2 (841 MPa) e G1 (702 MPa). Conclusão: De acordo com os resultados apresentados, pode-se concluir que a distribuição de tensões foi mais homogênea e menos concentrada no conjunto implante-pilar do G1. Portanto, recomenda-se o uso de pilares com dimensões padronizadas pelo fabricante do implante.

Peri-implant bone level assessment of early loaded dental implants submitted to different prosthetic protocols: a case report / Avaliação do nível ósseo peri-implantar de implantes dentários com carregamento antecipado submetidos a protocolos protéticos diferentes: relato de caso

Aim: The present split-mouth case report aims to describe the clinical and radiographic long-term outcomes of the implant rehabilitation of two mandibular premolars in which the digital workflow was used to apply different prosthetic protocols. Case description: A female 42-year-old patient with the absence of both mandibular second premolars was submitted to guided surgery for the placement of platform-switching Grand Morse connection implants. Digital workflow was used for implant and prosthetic planning, applying early loading protocol 21 days after surgery. The implant on the right side received the final abutment at the time of surgery (without loading), whereas the implant on the left side had a healing abutment placed, which was replaced by a temporary abutment and then by a final abutment. Two months after surgery, both implants had final ceramic restorations delivered. The patient was followed clinically and radiographically for 30 months, presenting excellent hard and soft tissue outcomes, with bone level changes lower than 2mm for both implants. Conclusion: The use of digital workflow and early loading, made the present implant-supported rehabilitation predictable, safe and time-efficient, resulting in total patient satisfaction. Peri-implant bone level was observed to be stable after early loading protocol for both platform-switching connection implants inserted, despite the prosthetic protocol applied.(AU)

Objetivo: O presente relato de caso de boca dividida tem como objetivo descrever os resultados clínicos e radiográficos a longo prazo da reabilitação com implante de dois pré-molares inferiores em que o fluxo de trabalho digital foi usado para aplicar os conceitos de "one abutment-one time" em uma das reabilitações e troca de componente no outro. Descrição do caso: Paciente do sexo feminino, 42 anos, com ausência de ambos os segundos pré-molares inferiores, foi submetida à cirurgia guiada para colocação de implantes de conexão Grand Morse plataforma-switching. Foi utilizado fluxo de trabalho digital para planejamento de implante e prótese, aplicando protocolo de carga antecipada 21 dias após a cirurgia. O implante do lado direito recebeu o componente protético definitivo no momento da cirurgia (sem carga), enquanto o implante do lado esquerdo recebeu um cicatrizador, que foi substituído por um pilar provisório e depois por um componente definitivo. Dois meses após a cirurgia, ambos os implantes tiveram restaurações cerâmicas finais entregues. A paciente foi acompanhada clínica e radiograficamente por 30 meses, apresentando excelentes resultados de tecidos duros emoles, com alterações do nível ósseo inferiores a 2mm para ambos os implantes. Conclusão: O fluxo de trabalho digital e carregamento precoce, tornou a presente reabilitação implantossuportada previsível, segura e eficiente em termos de tempo, resultando em total satisfação do paciente. O nível ósseo peri-implantar foi observado como estável após o protocolo de carregamento inicial para ambos os implantes de conexão plataforma-switching inseridos, independente do protocolo protético aplicado. (AU)

Prospective Evaluation of Bone Remodeling in Full-Arch Rehabilitations with Morse Taper Implants: A Case Series Study with One-Year Follow-Up.

This case series study evaluated the survival, success rate and marginal bone remodeling of Morse taper hydrophilic implants placed for full-arch rehabilitations over a 1-year follow-up period. Ten patients in need of maxillary and/or mandibular full-arch rehabilitation were selected. Sixty-six Morse taper implants and sixty-six abutments were inserted. All implants were placed using a surgical flap approach without bone regeneration and were immediately loaded with definitive prostheses according to the passive fitting technique. The patients underwent clinical and radiographic follow-up at different postoperative periods: T0 = immediate (up to 1 month after surgery); T1 = 3-4 months after surgery; T2 = 6-8 months after surgery; and T3 = 1 year after surgery. The survival and success rate of the implants and the marginal bone remodeling were evaluated. Normal distribution of the outcomes was verified by Kolmogorov-Smirnov tests. Therefore, changes in vertical and horizontal marginal bone levels were assessed with paired t-tests. Results were considered significant for P < 0.05. Survival and success rates of 100% and 92.4%, respectively, were observed. Statistically significant vertical bone level changes were shown for all periods. From T0 to T3, there was a mean difference in vertical bone loss of -1.02 mm on the mesial surface and of -0.93 mm on the distal surface, for horizontal bone loss in the same period, it was observed mean changes of -0.14 mm on the mesial surface and -0.09 mm on the distal surface. This 1-year case series follow-up of immediate full-arch rehabilitation, using one-step hybrid passive fitting supported by four to six hydrophilic tapered implants, suggests predictability with high survival and success rates in edentulous patients.

Influence of risk factors on the long-term survival of oral rehabilitation with extra-narrow implants: a retrospective study.

OBJECTIVE: This study aimed to retrospectively collect clinical data to evaluate the influence of possible risk factors on the long-term success of implant treatment with extra-narrow (2.9 mm diameter) implants in a daily dental practice setting. METHODOLOGY: Data were collected from records of patients who received at least one extra-narrow implant from 2012 to 2017, regarding implant survival, prosthesis survival, patient characteristics, and implant characteristics. The association between the dependent variables "implant survival", "prosthesis survival," and "adverse events" related to patient and implant characteristics was statistically evaluated by chi-square tests. Moreover, implant and prosthesis survival were analyzed by Kaplan-Meier survival curves. RESULTS: The sample was constituted of 58 patients (37 women and 21 men) with a mean age of 54.8 years old (SD: 12.5), followed up for up to eight years. In total, 86 extra-narrow implants were placed within this sample. Four implants were lost, resulting in an implant survival rate of 95.3%. A total of 55 prostheses were inserted and only one (1.8%) was lost, resulting in a prosthesis survival rate of 98.2%. The mean implant and prosthesis survival time was, respectively, 7.1 years and 6.3 years, according to the Kaplan-Meier survival analysis. A correlation was found between smoking and implant loss, which makes implant loss eight times more likely to occur in smokers than non-smokers. A significant association was also found between prosthesis loss and previous need of prosthesis repair. However, it was not considered clinically relevant. No association was found between the occurrence of adverse events and later implant or prosthesis loss. CONCLUSION: High implant and prosthesis survival rates were found in the long term for treatment with extra-narrow implants. Moreover, a significant correlation between smoking and implant loss was observed.

Clinical and radiographic outcomes of maxillary lateral incisors rehabilitation using Morse taper connection extra-narrow implants at 12-month follow-up: A case report.

Narrow-diameter implants (≤3.5 mm) have been proposed to address the challenge of implant placement in cases of insufficient bone quantity, thin alveolar crest, and small cervical diameter teeth replacement The aim of this study is to report one-year outcomes of extra-narrow implant rehabilitation of maxillary lateral incisors, due to agenesis, in a young adult that presented sites with reduced mesiodistal and buccolingual dimensions. A 26-year-old male patient in need of fixed-implant supported prostheses due to the absence of permanent maxillary lateral incisors and with limited space, was submitted to surgery to receive two 2.9 mm hybrid Morse taper connection implants with hydrophilic surfaces. Immediate loading was applied by means of insertion of provisional prostheses, which were replaced for all-ceramic prostheses 12 months after surgery. The 1 year follow-up showed clinical and radiographic success of extra-narrow implant rehabilitation. Also, both regions presented good evolution of peri-implant esthetics, as assesses using the pink esthetic score, with improvements at 4 months follow-up and reaching high scores 12 months after surgery. Although the prosthetic rehabilitation of maxillary lateral incisors is challenging due to limited space for the insertion of implants, the clinical case suggests that the use of extra-narrow Morse Taper implants with hybrid design and hydrophilic surface is a reliable alternative, presenting good outcomes regarding hard and soft tissue and it is a versatile solution or immediate loading procedure. Further studies are needed to confirm extra-narrow implant predictability.

Retrospective Multivariate Clinical Analysis of 2707 Dental Implants with Hydrophilic and Hydrophobic Surfaces: Survival Rates after Up to 5 Years.

The aim of this retrospective study was to evaluate the long-term predictability of treatment using implants with hydrophobic and hydrophilic surfaces, according to clinical parameters and survival rates. Records from all patients who received dental implants between January 2013 and December 2014 at ILAPEO College were fully evaluated by two graduate dentists. Records with incomplete or unclear data were excluded from the study. The variables evaluated were demographic data, design of implants and prosthetic components, type of loading, data related to the patients' general health, and survival of implants and prostheses. The final retrospective sample comprised 776 patients with 2707 implants, with up to 5 years of follow-up. Survival rates of implants and prostheses were 97.93% and 98.77%, respectively. Implants with hydrophobic (97.87%) and hydrophilic (98.34%) surfaces exhibited similar survival rates. Considering the different types of loading, there was no statistically significant difference between loading protocols regarding implant survival rates. Unsuitable healing capacity, uncooperative and not motivated patient, loss of prosthesis, and peri-implant bone loss were confirmed statistically to be factors that may contribute to implant loss, according to hazard ratio and odds ratio. The present study showed similar and high overall survival rates for implant with both types of surfaces, in the long term. The surface treatment, implant model and loading protocol had no significant influence on implant loss. Therefore, the evaluated implant systems were able to offer a high predictability for both hydrophobic and hydrophilic implants.

Using the Digital Flow to Increase Efficiency in Complex Partial Rehabilitation with Dental Implants.

BACKGROUND: This report presents a clinical case in which the CAD-CAM technology was applied to optimize a complex partial rehabilitation with implant-supported prostheses of a patient with several functional and aesthetic issues. Case presentation. A 40-year-old patient with several complaints due to the absence of multiple teeth and great dissatisfaction regarding his oral health was referred to a Dental College (Curitiba, Brazil). Guided surgery of 11 implants was planned. Digital flow and immediate loading protocol were applied. The patient was followed up for 2 years presenting good clinical and radiographic outcomes. CONCLUSIONS: The digital flow brought agility and precision to implant placement, immediate provisionalization added to satisfaction in the provisional phase, and CAD/CAM technology provided predictability and comfort to deliver the definite restorations.

Influence of risk factors on the long-term survival of oral rehabilitation with extra-narrow implants: a retrospective study

Abstract Objective This study aimed to retrospectively collect clinical data to evaluate the influence of possible risk factors on the long-term success of implant treatment with extra-narrow (2.9 mm diameter) implants in a daily dental practice setting. Methodology Data were collected from records of patients who received at least one extra-narrow implant from 2012 to 2017, regarding implant survival, prosthesis survival, patient characteristics, and implant characteristics. The association between the dependent variables "implant survival", "prosthesis survival," and "adverse events" related to patient and implant characteristics was statistically evaluated by chi-square tests. Moreover, implant and prosthesis survival were analyzed by Kaplan-Meier survival curves. Results The sample was constituted of 58 patients (37 women and 21 men) with a mean age of 54.8 years old (SD: 12.5), followed up for up to eight years. In total, 86 extra-narrow implants were placed within this sample. Four implants were lost, resulting in an implant survival rate of 95.3%. A total of 55 prostheses were inserted and only one (1.8%) was lost, resulting in a prosthesis survival rate of 98.2%. The mean implant and prosthesis survival time was, respectively, 7.1 years and 6.3 years, according to the Kaplan-Meier survival analysis. A correlation was found between smoking and implant loss, which makes implant loss eight times more likely to occur in smokers than non-smokers. A significant association was also found between prosthesis loss and previous need of prosthesis repair. However, it was not considered clinically relevant. No association was found between the occurrence of adverse events and later implant or prosthesis loss. Conclusion High implant and prosthesis survival rates were found in the long term for treatment with extra-narrow implants. Moreover, a significant correlation between smoking and implant loss was observed.

Clinical and radiographic success of injection-molded 2-piece zirconia implants submitted to immediate loading: A 12-month report of two cases.

This case report describes the treatment of two patients who presented with single edentulous sites in the region of upper premolars and were rehabilitated through the placement of injection-molded 2-piece zirconia implants and immediate single crowns. Three months after surgery, definitive prostheses were confectioned through digital workflow. Both patients were followed for 12 months during which clinical and radiographic implant success were observed, concerning implant stability, absence of peri-implantitis signs, complete implant osseointegration, good marginal bone-level maintenance, and excellent soft tissue esthetics. No biological or mechanical complications were observed within this period.

Factors influencing implant and prosthesis survival in zygomatic implant-supported fixed rehabilitation: a retrospective study.

BACKGROUND: The aim of this retrospective study was to evaluate mid-term implant and prosthesis survival in patients with edentulous atrophic maxillae submitted to zygomatic implant-supported fixed rehabilitation and to identify possible related risk factors. METHODS: Data were collected from records of patients with edentulous atrophic maxillae, in good general health and who were rehabilitated by means of acrylic resin full-arch screw-retained prosthesis supported by at least one zygomatic implant, between the years of 2006-2017. Implant and prosthesis survival rates were calculated. The association between implant and prosthesis loss and quantitative and qualitative variables of interest was verified with t tests and Fisher's exact tests, respectively. For the significant variables in the latter, odds ratio and 95% confidence intervals were additionally calculated. RESULTS: The sample comprised 66 patients in whom 171 zygomatic implants were placed to support maxillary screw-retained full-arch prostheses. Implant and prosthesis survival rates of 94.15% and 92.4%, respectively, were observed in a mean of 3.6 years of follow-up (up to 11.7 years). Implant loss was 4.33 more likely to occur when adverse events were recorded after the procedure of implant placement (P = 0.026) and 10.31 more likely to occur in implants that had their prosthesis repaired during follow-up visits (P = 0.004). Prosthesis loss was 22.00 times more likely to occur when implants were previously lost (P < 0.001). All prostheses that were considered as failures (i.e. were replaced) had been previously submitted to laboratory repair at some point during follow-up. CONCLUSIONS: Zygomatic implant rehabilitation demonstrated to be a reliable method with good mid-term results. The occurrence of post-surgical adverse events and need for laboratory repair of the prosthesis were found to be significant risk factors for implant loss. Previous implant loss was significantly associated with prosthesis loss. These risk factors may be prevented by means of detailed planning of the rehabilitation to be carried out, including post-operative care of the patients, so that treatment success using zygomatic implants can be achieved.

Full arch rehabilitation in patients with atrophic upper jaws with zygomatic implants: a systematic review.

BACKGROUND: The main objective of this systematic review was to present the outcomes of the treatment with zygomatic implants (ZIs) in the rehabilitations of atrophic upper jaw. FINDINGS: An electronic database search in PubMed, along with a manual search, taking into account language and study period, was performed by two observers; any type of clinical trial and series that included the use of ZIs was used. In the search strategy, the following search terms were used: zygom* AND dental (Implant OR implants) AND edentulous NOT (biomechanic* OR finite element) NOT cadaver. The search was limited to English language, full text, and humans. Literature reviews and clinical case reports were not considered. Forty-two articles published between March 2003 and April 2019 were included in this analysis. The cases of 1247 patients were recovered; these patients received 2919 ZIs. Fifty-two ZIs were removed during the follow-up time. The survival rate of these implants was 98.22%, with a minimum follow-up of 1 month and a maximum of 228 months. Different surgical techniques were used to place ZIs; however, the intrasinusal technique was the most used (23 studies). Post-surgical sinusitis was the most common complication reported in the studies (39 cases). CONCLUSIONS: Based on this review, ZIs were commonly used for rehabilitation of patients with atrophic upper jaw. The survival rates presented were high, and the surgical technique is dependent on the professional experience and the local anatomy. However, it needed additional clinical evidence on bone resorption, esthetic outcomes, and physiological characteristics.

Evaluation of the Mechanical Reliability of Different Implant-Abutment Connections for Single Crowns According to the ISO 14801 Fatigue Test Protocol.

PURPOSE: The aim of this in vitro study was to evaluate the mechanical behavior regarding dynamic fatigue of different implant-abutment connections and the unitary indication of abutments for all regions of the mouth. MATERIALS AND METHODS: This experimental study developed according to international standards (ISO 14801:2007) was performed using five types of implants and abutments: G1-external hex smart implant and 17-degree universal abutment (EHS); G2-cortical external hex implant and 17-degree universal abutment (EHTi); G3-internal hex implant and 30-degree universal abutment (IH); G4-Morse taper implant (11.5 degrees) and 17-degree universal abutment (MT11.5); and G5- Morse taper implant (16 degrees) and 30-degree universal abutment (MT16). A 15-Hz cyclic loading was applied to the specimens with the maximum number of cycles set at 5 × 106. Success was defined when three samples supported 5 million cycles without failure. The maximum load supported from each group after dynamic loading was recorded. The Spearman correlation and the Lowess method were used to analyze the correlation between the number of cycles and the applied load, and the Kruskal-Wallis and Nemenyi tests were used for comparison between the abutments when reaching 5 million cycles. RESULTS: There was a negative correlation (r < 0.00) and significant difference (P < .05) between the number of cycles and the load for each type of implant and abutment. The load values supported by each group after cyclic loading to achieve 5 million cycles were as follows: EHS, 225 N; EHTi, 215 N; IH, 220 N; MT11.5, 210 N; and MT16, 240 N. The MT16 implant-abutment assembly presented a significantly higher load (P = .024) than the MT11.5 implant-abutment assembly. CONCLUSION: All implant-abutment connections investigated in this study resisted average occlusal force values reported as acceptable in the literature and may be indicated for any region of the mouth.

Implant and prosthesis survival rates of full-arch immediate prostheses supported by implants with and without bicortical anchorage: Up to 2 years of follow-up retrospective study.

OBJECTIVES: To compare implant and prosthesis survival rates between full-arch immediate prostheses supported by 4 hydrophilic implants with bicortical anchorage and by 5 or 6 hydrophilic implants placed without bicortical anchorage. MATERIAL AND METHODS: The sample was retrospectively selected and comprised completely edentulous patients treated with full-arch immediate prostheses supported by Morse Taper hydrophilic implants. The selected patients were divided into four groups, according to the region of implant placement and type of anchorage. Differences in implant and prosthesis survival rates between groups, as well as the influence of bicortical anchorage on implant primary stability, were verified using Fisher's exact tests (significant at p < .05). RESULTS: The sample comprised 392 implants, 72 were placed in the maxilla with bicortical anchorage, and 85 were placed without. In the mandible, 140 implants were placed with and 95 were placed without bicortical anchorage. The follow-up period was up to 24 months. A 98.8% implant survival rate was observed for the group of implants placed without bicortical anchorage in the maxilla, and of 100% for the other groups. The overall implant survival rate was 99.7% (391 of 392 implants). Prosthesis survival rate was 100% for all groups. No differences were observed between groups with respect to implant and prosthesis survival rates. Significantly higher primary stability was observed for implants placed with bicortical anchorage in both jaws. CONCLUSION: Predictable results and high survival rates were achieved within the period evaluated by the present retrospective study, with immediate full-arch prostheses when only four hydrophilic implants are placed bicortically.

Surgical and Prosthetic Outcomes of 967 Implants Under Immediate or Delayed Loading in Full-Arch Rehabilitation: a Retrospective Study With up To 5 Years of Follow-Up / Resultados Cirúrgicos e Protéticos de 967 Implantes Submetidos à Carga Imediata ou Tardia Na Reabilitação de Arcos Completos: um Estudo Retrospectivo com Até 5 Anos de Acompanhamento

Objective: The aim of this study was to evaluate implant and prosthesis survival rates in full-arch rehabilitation supported by implants with platform-switched Morse taper connection submitted to immediate or delayed loading, after up to 5 years of follow-up. Material and Methods: Data was retrospectively collected from clinical records of patients who were treated by means of implant-supported full-arch rehabilitation. Survival rates of implants and prostheses were evaluated according to immediate or delayed loading. Results: The sample comprised 967 implants. Of those, 627 were submitted to immediate loading (IL) while 340 to delayed loading (DL). After a follow-up period of up to 5 years, the implant survival rate for IL was of 99.7% (622/627 implants) and 97.2% (333/340 implants) for DL. The overall implant survival rate was 98.8% (955/967 implants). Prosthesis survival rate was 100% (N = 178) for both groups. Significantly more implants in the DL group presented bone loss (p > 0.01), either greater or lower than 2 mm, during the follow-up period. Conclusion:Within their limits, the present results suggest that full-arch rehabilitation with platform-switched Morse taper connection implants can lead to surgical and prosthetic predictable outcomes. Moreover, immediate loading protocol seems to be a good option for the rehabilitation of fully edentulous patients, as it involves a shorter treatment time, which may lead to greater patient satisfaction. (AU)

Objetivo: O objetivo deste estudo foi avaliar as taxas de sobrevivência de implantes e próteses em reabilitações de arco completo suportadas por implantes de conexão cone Morse e platform switching submetidos à carga imediata ou tardia, após até 5 anos de acompanhamento. Material e Métodos: Os dados foram coletados retrospectivamente em prontuários clínicos de pacientes que foram tratados por meio de reabilitação de arco completo suportada por implantes. As taxas de sobrevivência de implantes e próteses foram avaliadas de acordo com a carga imediata ou tardia. Resultados: A amostra foi composta por 967 implantes. Destes, 627 foram submetidos à carga imediata (IL) e 340 à carga tardia (DL). Após um período de acompanhamento de até 5 anos, a taxa de sobrevivência de implantes para IL foi de 99,7% (622/627 implantes) e de 97,2% (333/340 implantes) para DL. A taxa de sobrevivência geral dos implantes foi de 98,8% (955/967 implantes). Taxa de sobrevivência da prótese de 100% (N = 178) foi encontrada para ambos os grupos. Significantemente mais implantes no grupo DL apresentaram perda óssea (p > 0,01), seja maior ou menor que 2 mm, durante o período de acompanhamento. Conclusão: Os presentes resultados sugerem, dentro de seus limites, que a reabilitação de arco completo com implantes de conexão cone Morse e platform switching pode obter resultados cirúrgicos e protéticos previsíveis. Além disso, o protocolo de carga imediata parece ser uma boa opção para a reabilitação de pacientes totalmente edêntulos, pois envolve um menor tempo de tratamento, o que pode levar a uma maior satisfação do paciente (AU)

Simplificação da técnica para reabilitação de maxila atrófica com implantes zigomáticos com interface cônica interna e carregamento imediato: relato de caso / Simplification of the technique for rehabilitation of atrophic upper jaw with zygomatic implants with internal tapered interface and immediate loading: case report

A reabilitação de maxilas atróficas com implantes dentários é sempre um desafio, visto que o uso de enxertos ósseos é quase sempre necessário para estabilização dos implantes. Os implantes zigomáticos têm sido utilizados como uma opção viável ao uso de procedimentos de enxertia óssea anterior à cirurgia. A interface cônica interna apresenta gap reduzido entre implante e componente protético, mostrando resultados biológicos e estéticos satisfatórios a longo prazo. Este artigo tem como objetivo relatar a reabilitação protética imediata de uma maxila atrófica com implantes convencionais e zigomáticos com interface cônica interna como opção ao uso de enxertos ósseos prévios. Paciente com 47 anos de idade, do sexo masculino, apresentava maxila atrófica e usava uma prótese total superior. O paciente foi reabilitado com quatro implantes convencionais na região anterior e dois implantes zigomáticos cônicos internos instalados nos ossos zigomáticos. Os torques de instalação dos implantes ≥ 60 N.cm proporcionaram estabilidade primária ideal e uma prótese (protocolo) foi instalada imediatamente utilizando a técnica do assentamento passivo. O caso clínico apresentado mostrou que, após 1 ano, resultados precisos e estéticos são possíveis de alcançar com a instalação de implantes zigomáticos combinados com implantes convencionais para reabilitação de maxilas atróficas de forma imediata e sem utilização de enxerto ósseos prévios.

The rehabilitation of atrophic upper jaws with dental implants is always a challenge, since the use of bone grafts is almost always necessary to stabilize the implants. Zygomatic implants have been used as a viable option for the use of bone grafting procedures prior to surgery. The internal tapered interface presents a reduced gap between implant and prosthetic component, showing satisfactory long-term biological and aesthetic results. This article aims to report the immediate prosthetic rehabilitation of an atrophic upper jaw with conventional and zygomatic implants with an internal tapered interface as an option for the use of previous bone grafts. A 47-year-old male patient presented with an atrophic upper jaw and used an upper total prosthesis. The patient was rehabilitated with four conventional implants in the anterior region and two internal tapered zygomatic implants placed in the zygomatic bones. The implant placement torques ≥ 60 N.cm provided ideal primary stability and a prosthesis (protocol) was installed immediately using the passive fit technique. The clinical case presented showed that, after 1 year, accurate and aesthetic results are possible to achieve with the placement of zygomatic implants combined with conventional implants for the rehabilitation of atrophic upper jaws immediately and without the use of previous bone grafts.

Retrospective Clinical Study of 453 Novel Tapered Implants Placed in All Bone Types: Survival Rate Analysis Up to 2 Years of Follow-Up.

PURPOSE: The aim of this retrospective study was to report the survival rate of a novel hybrid hydrophilic dental implant design for all bone types. MATERIALS AND METHODS: This study evaluated the data collected from patients who received at least one implant to support a full-arch, partial, or single-crown dental rehabilitation in the maxilla or mandible. Implant survival rate was evaluated according to the clinical area and bone type, loading protocol, implant length and diameter, and placement torque. RESULTS: A total of 453 tapered hybrid implants placed in 101 patients (mean age: 56.39 ± 12.98 years) were evaluated, and the survival rate was 99.6%. The follow-up period was up to 24 months. Regarding bone quality, types I, III, and IV presented a 100% survival rate, whereas type II presented a 99.3% survival rate. The vast majority of implants were immediately loaded (443 implants), which achieved placement torques between 32 and 60 Ncm or higher, and presented an implant survival rate of 99.5%. CONCLUSION: An overall survival rate of 99.6% was found for hydrophilic hybrid dental implants when placed in all bone types, and no statistically significant difference was observed between them. However, further studies should be necessary to confirm these preliminary results.

Guided osteotomy and implants placed with free hands for double full arch rehabilitation with immediate prosthetic loading / Osteotomia guiada e implantes instalados com as mãos livres para reabilitação de arco duplo total com carga protética imediata

ABSTRACT Precise planning for dental implant placement requires appreciation of anatomical limitations and restorative purpose. Diagnosis can be made by complementary exams such as panoramic radiography and cone-beam computed tomography. The purpose of this study was to rehabilitate the upper and lower jaw of a patient with severe periodontal disease using a guided osteotomy and implants placed with free hands and Morse taper implants. The concept of guided surgery was used to prepare the alveolar bone to place eight implants, four implants in the upper jaw and four implants in the lower jaw, all have achieved a minimum torque of 60 Ncm. The modified suture technique was used to better stabilize the soft tissue around the mini conical abutments. The analogues were scanned by CAD/CAM for confection of the metallic structures of the bridges. On the third day, the upper and lower full arch prostheses were installed and simultaneous bilateral contacts were adjusted. After 12 months of patient follow-up, the implants and prostheses were in good condition of aesthetics and function, maintaining the success of the rehabilitation. Within the limitations of this clinical case, it can be concluded that the implants placed with free hands was facilitated by a previous guided osteotomy.

RESUMO O planejamento preciso para a instalação de implantes dentários requer a apreciação das limitações anatômicas e objetivos restaurativos. O diagnóstico pode ser feito por exames complementares, como radiografia panorâmica e tomografia computadorizada de feixe cônico. O objetivo deste estudo foi reabilitar, a mandíbula superior e inferior de um paciente com doença periodontal severa, utilizando uma osteotomia guiada e implantes cone Morse instalados com as mãos livres. O conceito de cirurgia guiada foi utilizado para preparar o osso alveolar para a instalação de oito implantes, quatro implantes no maxilar superior e quatro implantes no maxilar inferior, todos alcançando um torque mínimo de 60 Ncm. A técnica de sutura modificada foi utilizada para melhor estabilizar o tecido mole ao redor dos mini-pilares cônicos. Os abutments foram escaneados por CAD/CAM para confecção das estruturas metálicas das próteses dentárias. No terceiro dia, as próteses de arco superior e inferior foram instaladas e os contatos bilaterais simultâneos foram ajustados. Após 12 meses de acompanhamento do paciente, os implantes e próteses estavam em boas condições de estética e função, mantendo o sucesso da reabilitação. Dentro das limitações deste caso clínico, pode-se concluir que os implantes instalados com as mãos livres foram facilitados pelo uso prévio da osteotomia guiada.

Previsibilidade na Instalação Imediata de Implante Cone Morse pelo Planejamento Digital e Provisionalização Imediata: Relato de Caso / Predictability in Immediate Implant Placement of Morse Taper by Digital Planning and Immediate Provisionalization: Case Report

A instalação imediata de implantes em região estética é uma prática frequente, pois reduzir a remodelação óssea e tecidual. Os implantes com interface cone Morse apresentam resultados biológicos e estéticos satisfatórios a longo prazo, pois apresentam gap reduzido entre implante e componente protético e a interface fica distante do tecido ósseo. Este artigo tem como objetivo relatar a reabilitação estética de um incisivo central superior comprometido através da instalação de um implante cone Morse utilizando a técnica da cirurgia guiada com provisionalização imediata. Paciente com 40 anos de idade, do sexo masculino, apresentava incisivo central superior (#21) com tratamento endodôntico prévio, recessão gengival vestibular, escurecimento coronário e mobilidade. O caso clínico apresentado mostrou que, após 12 meses, resultados precisos e estéticos são possíveis de alcançar com a instalação de implantes em alvéolos pós-extração e instalação de um dente provisório imediato em regiões estéticas.

The immediate placement of implant in fresh sockets in the aesthetic area is a frequent practice as it reduces bone and tissue remodeling. Morse taper implants present satisfactory biological and aesthetic results in the long term, since they present a reduced gap between implant and prosthetic component and this interface is distant from bone. This article aims to report the aesthetic restoration of a compromised central upper incisor with the placement of a Morse taper implant using guided surgery with immediate provision. A 40-year-old male patient had a central upper incisor (#21) with previous endodontic treatment, vestibular gingival recession, coronary browning, and mobility. The clinical case presented showed that, after 12 months, precise and aesthetic results are possible to achieve with the placement of implants in post-extracting alveolus and installation of an immediate provisional tooth in esthetic regions.